понеделник, 31 май 2010 г.

gpsd test install log - tangogps

gpsd - get and install from berlios:

tangoGPS - from home page

start like root:
gpsd -N -G -D 4 /dev/ttyUSB0

GPS device - /dev/ttyUSB0 - for My
-N to get data continuously
-G to listen on all interfaces
-D debug Level

To test:
telnet 2947

To get log from GPSD:
cgpxlogger > track.gpx
- for quick test cgps is used.
- do not use tee or other - will broke XML at END.

If all working well and GPS get signal:
- see in telnet:
- in cgpxlogger:


- in gpsd debug:
gpsd: PrintSERPacket(, 0x33, 0x40, ) = 0x100383fa
gpsd: SendPacket(), writing 6 bytes: 100600fa1003
gpsd: PrintSERPacket(, 0x6, 00, )
gpsd: ACK
gpsd: PrintSERPacket(, 0x6, 00, ) = 00
gpsd: => GPS: 100600fa1003
gpsd: SendPacket(), wrote 6 bytes
gpsd: <= GPS (binary) /dev/ttyUSB0: $GPGGA,083717,4241.2020,N,02315.3574,E,2,00,,646.51,M,36.847,M,,*58\x0d\x0a$GPRMC,083717,A,4241.2020,N,02315.3574,E,0.2071,344.474,310510,,*22\x0d\x0a$GPGSA,A,2,,,,,,,,,,,,,0.0,0.0,0.0*33\x0d\x0a$PGRME,86.39,M,28.69,M,91.03,M*24 gpsd: => client(0): $GPGGA,083717,4241.2020,N,02315.3574,E,2,00,,646.51,M,36.847,M,,*58\x0d\x0a$GPRMC,083717,A,4241.2020,N,02315.3574,E,0.2071,344.474,310510,,*22\x0d\x0a$GPGSA,A,2,,,,,,,,,,,,,0.0,0.0,0.0*33\x0d\x0a$PGRME,86.39,M,28.69,M,91.03,M*24
gpsd: => client(1): $GPGGA,083717,4241.2020,N,02315.3574,E,2,00,,646.51,M,36.847,M,,*58\x0d\x0a$GPRMC,083717,A,4241.2020,N,02315.3574,E,0.2071,344.474,310510,,*22\x0d\x0a$GPGSA,A,2,,,,,,,,,,,,,0.0,0.0,0.0*33\x0d\x0a$PGRME,86.39,M,28.69,M,91.03,M*24
gpsd: garmin_ser_parse() Type: 0x33, Len: 0x40, chksum: 00

In EVERY LOG is seen :
This mean that GPS Lock position from Two satelites! This is very important.

If not Lock acquired, you will see:
"GPS has no fix" in gpsd log
A,1 - in telnet log
and no gpx log will be created from cgpslogger.
Any program will not work and give strange results :).

Google Maps:

And then:
http://norman.walsh.name/2006/06/20/gpxGoogle - this tool will make from GPX ready for use html - many thanks to creator.

http://www.obviously.com/gis/gpx_loader.html - load GPX file to google maps
Some KEY need :)

http://www.chrislacy.net/map/current/index.html - another loader for GPX file

See here for more:

петък, 28 май 2010 г.

catalist 10.5

From Aur: patches for 2.6.33 and 2.6.34-rc4.

--extract SomeDir

cd SomeDir/common/lib/modules/fglrx/build_mod/
cat PatchName| patch

cd SomeDir
./ati-installer.sh . --buildpkg Slackware/All
this will make packages in ../ Dir

If make in hand:
cp /usr/src/ati/fglrx-10.5/arch/x86_64/lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC4 SomeDir/common/lib/modules/fglrx/build_mod/

петък, 21 май 2010 г.

memtest86+ on 64 Amd

memtest86+-4.10 HowTo

memtest.bin - linux Kernel x86 :)
copy "memtest.bin" to your boot dir /boot usually, not memtest it's ELF exe
add this:

image = /boot/memtest.bin
root=/dev/sda3 # no need
label = Memtest86

execute from bash like root, to refresh Loader >lilo

Grub: close to upper.

reboot choose memtest! And Happy waiting.

сряда, 19 май 2010 г.

Sata hot add remove

Hot Add: redetect for devices on Bus 0, replace host0 with host0-.. for other. It's harmless to try with all ready working devices.
echo "- - -" > /sys/class/scsi_host/host0/scan

Hot Remove: spin down and disable device. Be careful - it can be Root, or mounted device.
!!! Some SATA devices are not HOT swap. !!!
echo 1 > /sys/block/sda/device/delete


понеделник, 17 май 2010 г.

slackware 64 with 32bit support compile trouble

1. Pass LDFLAGS to configure, possibly
LDFLAGS='-L/lib64 -L/usr/lib64 -L/usr/X11/lib64 -L/opt/kde/lib64' or
something like that.

This help mi, compiling libtorrent: LDFLAGS='-L/lib64 -L/usr/lib64' ./configure

/usr/lib64/../lib/libstdc++.so: could not read symbols: File in wrong format

from: http://osdir.com/ml/lfs.clfs.support/2006-07/msg00103.html